Depending on the remaining charge and how many times you used the module a fully drained Module should take approximately 25-30 minutes to charge.
Always charge the module when the switch is turned on (right side)
Be sure to fully charge the module after every flight, this is critical keep the battery capability to recharge again after storage. A module that was fully drained and not charged before storage will become unusable and unrepairable within a few months.
The Off/On-Charge switch is small and delicate, be careful not to put too much pressure when you turn it on or off other wise you may damage the module, if you are having dificulty accessing it use a toothpick or a pen to move it to the correct position.
Charging is done via a micro USB port, you can use any standard wall adapter, computer or portable USB charging device for this purpose.
Charging status - the most reliable status is provided by the blinking LED light. Transition from fast blinking to slow blinking of the LED indicates that your module is fully charged.
App battery level indication - is for reference only and is not very accurate. We recommend to rely on the LED blinking status.