Preparing your Plane

Assembling the Smart Module

Insert the front of the airplane’s keel (the nose of the airplane) into the clips of the Smart Module, making sure that the keel goes all the way into the clips.

The clips should be on the underside of the plane, and the fin should be between the wings.

Note: If the rod of the Smart Module sticks out above the body of the airplane, you can tape the rod to the plane.

Adjusting the Airplane’s Control Surfaces

• Elevator tabs: Raise the elevator tabs slightly

• Wings: Raise the wings slightly to create a small dihedral angle

Go to the next page - The Setting Screen

Back to the PowerUp 3.0 User Guide