Battery Insertion and Charging

NOTE: is you purchased the item less than 6 months ago and you suspect that the FPV battery is not charging, please contact [e-mail]  for a resolution.

To protect your battery after a flight, charge your battery to 50% and store it separately from the module between flights. 

Connect the POWERUP FPV to a power source with a USB cable, only then insert the battery.

Read this article on charging.

Before flight: Insert the battery into place - the triangle points at the direction of the insertion!

Push the battery in until the triangle clicks into place

Never insert the battery upside down or in any direction different the one instructed above. 

DO NOT TRY TO REMOVE OR PRY OUT THE BATTERY WITH A TOOL! CONTACT OUR [e-mail] AND WE WILL GUIDE YOU HOW TO RESOLVE THE ISSUE.

POWERUP X FPV models

Battery installation has a 2 step process (first time use)

Step #1 -  Remove the plastic protection card and discard it.

Step #2 - Push the battery in-place with your thumb until you hear a click sound.

The rear of the battery should now align and be flush with the rear of the battery compartment.

 The module  main LED should now light up and start your airplane.

Please follow the instructions how to charge your module before flying.

Removing of the battery is done by pulling the battery out while carefully lifting the battery locking latch.