Q - What planes require the use of the Accessory kit?

The Accessory kit includes the following parts:

• 2 vertical connectors
• 2 horizontal connectors
• 2 locking plates
• 1 front clip for thick materials
• 1 rear landing gear
• 1 front landing gear
• 6 screws 
• 1 phillips screw driver

Note -  the 6 small screws are fastened with tape to the front clip 

Some of our foam and balsa planes make use of the connectors to fasten the POWERUP 4.0 module to the airframe or wing.

• The F22 jet requires one vertical connector and locking plate and 2 screws.
• The Tornado updraft 12 requires two vertical connectors  2 locking plate and 4 screws.
• The EZ bug requires two horizontal connectors  2 locking plate and 4 screws.
• The EZ Streak requires one vertical connector and locking plate and 2 screws.
• The Onslaught ground takeoff design uses the front and rear landing gears.