Flitetest F22 Inverted Module Setup - Read Before Flying!

Before attempting to fly the kit, please take note of a few precautions which are critical for the integrity of your kit:

• The module is mounted under the belly of the plane and in an inverted setup. We found that this setup exposes the antenna and switch to potential fatal damage if flown on a hard surface like tarmac. Please always fly your kit on a soft grassy surface to ensure protection to your kit. A module with a "shaved" antenna will NOT function beyond a few feet. Also note that this damage is not covered by our warranty. We are working on updating the mounting setup to right-side-up so antenna and switch will be protected in landing scenarios of this jet configuration.
• Before flying the this model, please be sure to choose in the "Hangar" screen the " FT F22" airplane model. Choosing this model will ensure correct autopilot function and bank control. You will notice in the Tuning screen that inverted mode is chosen automatically for the F22 model. Flying the F22 model in "Normal" mode will  cause your plane to turn right when you bank left and visa versa.